Wrapped Agricultural Belts
Wrapped Variable Speed Harvester Belts
Wrapped Variable Speed Harvester Belts
Category
Agricultural Belts
Series
Variable Speed Agricultural Belts
Product Overview
- • Whether this series matches the machine family you are sourcing for.
- • What structure or profile data should be checked before RFQ.
- • When to stop browsing and send the project for technical review.
Ready for technical review
Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.
- • Belt marking or sample photo
- • Pulley diameter and tooth/profile data
- • Target quantity and delivery expectation
Construction
- Polychloroprene impregnated high modulus fabric
- Specially designed high modulus cushion compound
- Extra high tensile polyester cord (available in Kevlar/Aramid cord also)
- Specially designed high modulus compression rubber
- Temperature Range: -18 to 80 for regular belts
- Temperature Range: -25 to 100 for special requirement belts
- Reference Standards: ASAE 211.4, BS 3790, DIN 2215, RMA IP 22, ISO 4184, IS 2494, ISO 5289, IS 11038, ISO 3410
- Harvester belts are specially designed for reverse idler application which is very common in harvester machines
- Belt is having high longitudinal flexibility suitable for small pulley / reverse idler drives
- No bottom cracking / chipping, as belt design is application specific
- Belt is specially designed to resist loads during application
- Antistatic & oil resistant
- High temperature resistant than the regular belt
- Lateral rigidity along the sides of the belt prevents belt deformation
- Significant performance under variable speed conditions
- Higher power transmission capacity: 25 to 30 % for Classical, Wedge & Narrow sections, 40 to 50 % for variable speed sections
- Low stretch due to high tensile strength cord, even under heavy loads
Overview
P.S: Other Sizes (40X20,45X20,50X20,38X18,32X16,55X25,60X25 etc.) in cog are also available.
Standards & Dimensions
| Section | Top Width (mm) | Pitch Width (mm) | Thickness (mm) |
|---|---|---|---|
| HG | 16.5 | 15.4 | 8 |
| HH | 20.4 | 19 | 10 |
| HI | 25.4 | 23.6 | 12.7 |
| HJ | 31.8 | 29.6 | 15.1 |
| HK | 38.1 | 35.5 | 17.5 |
| HL | 44.5 | 41.4 | 19.8 |
| HM | 50.8 | 47.3 | 22.2 |
| HN | 57.2 | 53.2 | 23.8 |
| HO | 63.5 | 59.1 | 25.4 |
Production Range
Wrapped Variable Speed Harvester Belts
| Profile | Length range (mm) |
|---|---|
| HG | 500-6000 |
| HH | 500-6000 |
| HI | 500-6000 |
| HJ | 500-6000 |
| HK | 500-6000 |
| HL | 500-6000 |
| HM | 500-6000 |
| HN | 500-6000 |
| HO | 500-6000 |
Proceed with RFQ
When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.