What should be confirmed before RFQ?

What structure or profile data should be checked before RFQ. Pulley diameter and tooth/profile data.

3VX 5VX 8VX

Deep Wedge Narrow Raw Edge Cogged V-Belts

Product Overview

• Whether this series matches the machine family you are sourcing for.
• What structure or profile data should be checked before RFQ.
• When to stop browsing and send the project for technical review.

Ready for technical review

Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.

• Belt marking or sample photo
• Pulley diameter and tooth/profile data
• Target quantity and delivery expectation

Request quote

Features

Oil resistant and antistatic
Maximum recommended belt speed is 30 m/s
High power transmission capacity than wrap belts
Superior transverse stiffness & high wear resistance
Suitable for drives with small pulley diameters, high ambient temperature and speed
Temperature range: -25 to +100
These sections are standardized in USA and Canada therefore it is primarily used in machines exported to/from these countries. 8VX section belts are used in heavy duty drives such as stone crushers.

Overview

In construction and properties the

narrow belts are similar to the wedge belts in performance, with the only

difference being the additional top ridge provided in the narrow belts.

These belts are manufactured according to specification RMA-IP 22 and also

known as American Wedge Belts. Interchangeability between Narrow &

Wedge belts Acceptable agreement and exchangeability is found between 3VX and XPZ as

well as between 5VX and XPB sections. It is possible to use 3VX and 5VX

section belts in pulleys of XPZ and XPB sections respectively but corollary

is not recommended as the top width of the RMA standard pulleys are

smaller. Section 8VX is however, larger than XPC.

The standard length designation for Narrow belts is as follows: Belt number / 10 = Outside length in inches. For example: 5VX 950 means 950 / 10= 95 inches outside length

Standards, Dimensions & Product Range:

The standard length designation for Narrow belts is as follows: Belt number / 10 = Outside length in inches. For example: 5VX 950 means 950 / 10= 95 inches outside length

Section	Top Width (mm)	Thickness (mm)	Angle (Deg)
3VX	9.5	8	40
5VX	15	13	40
8VX	25	23	40

Production Range

3VX

Type 5VX

Type 8VX

No.	Model	Outside Length(inch)	Outside Length(mm)	No.	Model	Outside Length(inch)	Outside Length(mm)
1	3VX250	25	635	30	3VX590	59	1499
2	3VX265	26.5	673	31	3VX600	60	1524
3	3VX280	28	711	32	3VX616	61.6	1565
4	3VX290	29	737	33	3VX630	63	1600
5	3VX300	30	762	34	3VX650	65	1651
6	3VX315	31.5	800	35	3VX670	67	1702
7	3VX326	32.6	828	36	3VX690	69	1753
8	3VX335	33.5	851	37	3VX710	71	1803
9	3VX350	35	889	38	3VX750	75	1905
10	3VX355	35.5	902	39	3VX771	77.1	1958
11	3VX366	36.6	930	40	3VX800	80	2032
12	3VX375	37.5	953	41	3VX826	82.6	2098
13	3VX385	38.5	978	42	3VX850	85	2159
14	3VX390	39	991	43	3VX900	90	2286
15	3VX400	40	1016	44	3VX926	92.6	2352
16	3VX415	41.5	1054	45	3VX950	95	2413
17	3VX425	42.5	1080	46	3VX974	97.4	2474
18	3VX450	45	1143	47	3VX1000	100	2540
19	3VX464	46.4	1179	48	3VX1027	102.7	2609
20	3VX475	47.5	1207	49	3VX1060	106	2692
21	3VX487	48.7	1237	50	3VX1088	108.8	2764
22	3VX500	50	1270	51	3VX1120	112	2845
23	3VX520	52	1321	52	3VX1146	114.6	2911
24	3VX530	53	1346	53	3VX1180	118	2997
25	3VX540	54	1372	54	3VX1224	122.4	3109
26	3VX550	55	1397	55	3VX1250	125	3175
27	3VX560	56	1422	56	3VX1296	129.6	3292
28	3VX570	57	1448	57	3VX1320	132	3353
29	3VX580	58	1473	58	3VX1400	140	3556

No.	Model	Outside Length(inch)	Outside Length(mm)	No.	Model	Outside Length(inch)	Outside Length(mm)
1	5VX350	35	889	45	5VX810	81	2057
2	5VX362	36.2	919	46	5VX830	83	2108
3	5VX372	37.2	945	47	5VX840	84	2134
4	5VX382	38.2	970	48	5VX850	85	2159
5	5VX392	39.2	996	49	5VX860	86	2184
6	5VX402	40.2	1021	50	5VX867	86.7	2202
7	5VX412	41.2	1046	51	5VX880	88	2235
8	5VX422	42.2	1072	52	5VX890	89	2261
9	5VX433	43.3	1100	53	5VX900	90	2286
10	5VX450	45	1143	54	5VX918	91.8	2332
11	5VX459	45.9	1166	55	5VX930	93	2362
12	5VX470	47	1194	56	5VX940	94	2388
13	5VX479	47.9	1217	57	5VX950	95	2413
14	5VX490	49	1245	58	5VX960	96	2438
15	5VX500	50	1270	59	5VX978	97.8	2484
16	5VX510	51	1295	60	5VX990	99	2515
17	5VX519	51.9	1318	61	5VX1000	100	2540
18	5VX530	53	1346	62	5VX1017	101.7	2583
19	5VX540	54	1372	63	5VX1030	103	2616
20	5VX550	55	1397	64	5VX1050	105	2667
21	5VX560	56	1422	65	5VX1060	106	2692
22	5VX570	57	1448	66	5VX1080	108	2743
23	5VX580	58	1473	67	5VX1108	110.8	2814
24	5VX590	59	1499	68	5VX1120	112	2845
25	5VX600	60	1524	69	5VX1139	113.9	2893
26	5VX610	61	1549	70	5VX1150	115	2921
27	5VX619	61.9	1572	71	5VX1160	116	2946
28	5VX630	63	1600	72	5VX1162	116.2	2951
29	5VX650	65	1651	73	5VX1180	118	2997
30	5VX660	66	1676	74	5VX1220	122	3099
31	5VX670	67	1702	75	5VX1230	123	3124
32	5VX680	68	1727	76	5VX1250	125	3175
33	5VX690	69	1753	77	5VX1277	127.7	3244
34	5VX700	70	1778	78	5VX1320	132	3353
35	5VX710	71	1803	79	5VX1374	137.4	3490
36	5VX720	72	1829	80	5VX1400	140	3556
37	5VX730	73	1854	81	5VX1469	146.9	3731
38	5VX740	74	1880	82	5VX1500	150	3810
39	5VX750	75	1905	83	5VX1600	160	4064
40	5VX760	76	1930	84	5VX1700	170	4318
41	5VX769	76.9	1953	85	5VX1701	170.1	4321
42	5VX780	78	1981	86	5VX1800	180	4572
43	5VX790	79	2007	87	5VX1900	190	4826
44	5VX800	80	2032	88	5VX2000	200	5080

No.	Model	Outside Length(inch)	Outside Length(mm)	No.	Model	Outside Length(inch)	Outside Length(mm)
1	8VX1000	100	2540	8	8VX1500	150	3810
2	8VX1060	106	2692	9	8VX1600	160	4064
3	8VX1120	112	2845	10	8VX1700	170	4318
4	8VX1180	118	2997	11	8VX1800	180	4572
5	8VX1250	125	3175	12	8VX1900	190	4826
6	8VX1320	132	3353	13	8VX2000	200	5080
7	8VX1400	140	3556

Proceed with RFQ

When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.

Request quote Industrial Belts Open downloads