What should be confirmed before RFQ?

What structure or profile data should be checked before RFQ. Pulley diameter and tooth/profile data.

XPZ XPA XPB XPC

Wedge Raw Edge Cogged Belts

Product Overview

• Whether this series matches the machine family you are sourcing for.
• What structure or profile data should be checked before RFQ.
• When to stop browsing and send the project for technical review.

Ready for technical review

Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.

• Belt marking or sample photo
• Pulley diameter and tooth/profile data
• Target quantity and delivery expectation

Request quote

Features

Oil resistant and antistatic
Maximum recommended belt speed is 30 m/s
High power transmission capacity than wrap belts
Superior transverse stiffness & high wear resistance
Suitable for drives with small pulley diameters, high ambient temperature and speed
Temperature range: -25oC to +100oC
General industrial and engineering drives

Overview

Wedge belts have been the result of a continuous thrust by the manufacturers and users on higher power transmissions with reduced space requirements. Wedge belts can transmit higher power to the extent of 1.5 to 2 times the classical belts with the same top width. This has been achieved by dimensional changes, apart from better cord construction used and the optimum placement of the cord line which provides the best support to the cord while in motion. During manufacturing we pre-stretch the cord before building into the belt. It offers lower stretch properties in the drive. This way we are able to reduce minimum installation and take up allowances significantly. For the efficient performance of wedge drive it is essential that the proper tension be maintained in the drive, failure to maintain the same will render the purpose of wedge belts ineffective.

We manufacture the entire range of wedge belts. The nominal length for XP wedge belts is designated as pitch length (Lp) in millimeter

Standards, Dimensions & Product Range:

We manufacture the entire range of wedge belts. The nominal length for XP wedge belts is designated as pitch length (Lp) in millimeter

Section	Top Width (mm)	Thickness (mm)	Angle (Deg)
XPZ	9.5	8	40
XPA	12.7	10	40
XPB	16.3	13	40
XPC	22	18	40

Production Range

Type XPZ

Type XPA

Type XPB

Type XPC

No.	Model	Pitch Length (mm)
1	XPZ	587	587
2	XPZ	612	612
3	XPZ	630	630
4	XPZ	637	637
5	XPZ	670	670
6	XPZ	710	710
7	XPZ	722	722
8	XPZ	730	730
9	XPZ	750	750
10	XPZ	762	762
11	XPZ	787	787
12	XPZ	800	800
13	XPZ	812	812
14	XPZ	825	825
15	XPZ	837	837
16	XPZ	850	850
17	XPZ	862	862
18	XPZ	875	875
19	XPZ	887	887
20	XPZ	900	900
21	XPZ	912	912
22	XPZ	925	925
23	XPZ	937	937
24	XPZ	950	950
25	XPZ	962	962
26	XPZ	987	987
27	XPZ	1000	1000
28	XPZ	1010	1010
29	XPZ	1012	1012
30	XPZ	1024	1024
31	XPZ	1030	1030
32	XPZ	1037	1037
33	XPZ	1047	1047
34	XPZ	1060	1060
35	XPZ	1077	1077
36	XPZ	1080	1080
37	XPZ	1087	1087
38	XPZ	1112	1112
39	XPZ	1120	1120
40	XPZ	1137	1137
41	XPZ	1140	1140
42	XPZ	1150	1150
43	XPZ	1162	1162
44	XPZ	1180	1180
45	XPZ	1187	1187
46	XPZ	1202	1202
47	XPZ	1212	1212
48	XPZ	1237	1237
49	XPZ	1250	1250
50	XPZ	1262	1262
51	XPZ	1270	1270
52	XPZ	1287	1287
53	XPZ	1312	1312
54	XPZ	1320	1320
55	XPZ	1337	1337
56	XPZ	1340	1340
57	XPZ	1362	1362
58	XPZ	1387	1387

No.	Model	Pitch Length (mm)
59	XPZ	1400	1400
60	XPZ	1412	1412
61	XPZ	1420	1420
62	XPZ	1437	1437
63	XPZ	1450	1450
64	XPZ	1462	1462
65	XPZ	1470	1470
66	XPZ	1487	1487
67	XPZ	1500	1500
68	XPZ	1512	1512
69	XPZ	1520	1520
70	XPZ	1537	1537
71	XPZ	1560	1560
72	XPZ	1562	1562
73	XPZ	1587	1587
74	XPZ	1600	1600
75	XPZ	1612	1612
76	XPZ	1637	1637
77	XPZ	1650	1650
78	XPZ	1662	1662
79	XPZ	1687	1687
80	XPZ	1700	1700
81	XPZ	1737	1737
82	XPZ	1750	1750
83	XPZ	1762	1762
84	XPZ	1787	1787
85	XPZ	1800	1800
86	XPZ	1812	1812
87	XPZ	1837	1837
88	XPZ	1850	1850
89	XPZ	1862	1862
90	XPZ	1867	1867
91	XPZ	1900	1900
92	XPZ	1937	1937
93	XPZ	1950	1950
94	XPZ	1962	1962
95	XPZ	1987	1987
96	XPZ	2000	2000
97	XPZ	2030	2030
98	XPZ	2037	2037
99	XPZ	2120	2120
100	XPZ	2137	2137
101	XPZ	2187	2187
102	XPZ	2240	2240
103	XPZ	2280	2280
104	XPZ	2287	2287
105	XPZ	2360	2360
106	XPZ	2410	2410
107	XPZ	2437	2437
108	XPZ	2500	2500
109	XPZ	2540	2540
110	XPZ	2690	2690
111	XPZ	2800	2800
112	XPZ	2840	2840
113	XPZ	3000	3000
114	XPZ	3160	3160
115	XPZ	3350	3350
116	XPZ	3550	3550

No.	Model	Length (mm)
1	XPA	530	530
2	XPA	732	732
3	XPA	760	760
4	XPA	782	782
5	XPA	800	800
6	XPA	832	832
7	XPA	850	850
8	XPA	900	900
9	XPA	910	910
10	XPA	925	925
11	XPA	932	932
12	XPA	950	950
13	XPA	982	982
14	XPA	1000	1000
15	XPA	1032	1032
16	XPA	1060	1060
17	XPA	1090	1090
18	XPA	1107	1107
19	XPA	1120	1120
20	XPA	1132	1132
21	XPA	1150	1150
22	XPA	1157	1157
23	XPA	1180	1180
24	XPA	1207	1207
25	XPA	1220	1220
26	XPA	1232	1232
27	XPA	1250	1250
28	XPA	1257	1257
29	XPA	1272	1272
30	XPA	1280	1280
31	XPA	1282	1282
32	XPA	1300	1300
33	XPA	1307	1307
34	XPA	1320	1320
35	XPA	1332	1332
36	XPA	1340	1340
37	XPA	1357	1357
38	XPA	1360	1360
39	XPA	1375	1375
40	XPA	1382	1382
41	XPA	1400	1400
42	XPA	1407	1407
43	XPA	1430	1430
44	XPA	1432	1432
45	XPA	1450	1450
46	XPA	1457	1457
47	XPA	1482	1482
48	XPA	1500	1500
49	XPA	1507	1507
50	XPA	1525	1525
51	XPA	1550	1550
52	XPA	1557	1557
53	XPA	1582	1582

No.	Model	Length (mm)
54	XPA	1600	1600
55	XPA	1607	1607
56	XPA	1650	1650
57	XPA	1657	1657
58	XPA	1680	1680
59	XPA	1682	1682
60	XPA	1700	1700
61	XPA	1707	1707
62	XPA	1732	1732
63	XPA	1750	1750
64	XPA	1757	1757
65	XPA	1782	1782
66	XPA	1800	1800
67	XPA	1807	1807
68	XPA	1832	1832
69	XPA	1850	1850
70	XPA	1857	1857
71	XPA	1882	1882
72	XPA	1900	1900
73	XPA	1907	1907
74	XPA	1932	1932
75	XPA	1950	1950
76	XPA	1957	1957
77	XPA	1982	1982
78	XPA	2000	2000
79	XPA	2032	2032
80	XPA	2057	2057
81	XPA	2060	2060
82	XPA	2082	2082
83	XPA	2120	2120
84	XPA	2132	2132
85	XPA	2180	2180
86	XPA	2182	2182
87	XPA	2207	2207
88	XPA	2240	2240
89	XPA	2282	2282
90	XPA	2307	2307
91	XPA	2360	2360
92	XPA	2382	2382
93	XPA	2432	2432
94	XPA	2482	2482
95	XPA	2500	2500
96	XPA	2582	2582
97	XPA	2682	2682
98	XPA	2732	2732
99	XPA	2800	2800
100	XPA	3000	3000
101	XPA	3150	3150
102	XPA	3182	3182
103	XPA	3350	3350
104	XPA	3750	3750
105	XPA	4000	4000
106	XPA	4250	4250
107	XPA	4500	4500

No.	Model	Length (mm)
1	XPB	1150	1150
2	XPB	1250	1250
3	XPB	1260	1260
4	XPB	1320	1320
5	XPB	1340	1340
6	XPB	1400	1400
7	XPB	1410	1410
8	XPB	1450	1450
9	XPB	1500	1500
10	XPB	1510	1510
11	XPB	1550	1550
12	XPB	1600	1600
13	XPB	1650	1650
14	XPB	1690	1690
15	XPB	1700	1700
16	XPB	1750	1750
17	XPB	1800	1800
18	XPB	1850	1850
19	XPB	1900	1900
20	XPB	1950	1950
21	XPB	2000	2000
22	XPB	2020	2020
23	XPB	2060	2060
24	XPB	2120	2120
25	XPB	2150	2150
26	XPB	2180	2180
27	XPB	2240	2240
28	XPB	2280	2280
29	XPB	2360	2360
30	XPB	2410	2410
31	XPB	2500	2500
32	XPB	2680	2680

No.	Model	Length (mm)
33	XPB	2800	2800
34	XPB	2990	2990
35	XPB	3000	3000
36	XPB	3150	3150
37	XPB	3340	3340
38	XPB	3350	3350
39	XPB	3550	3550
40	XPB	3650	3650
41	XPB	3750	3750
42	XPB	3800	3800
43	XPB	4000	4000
44	XPB	4060	4060
45	XPB	4250	4250
46	XPB	4310	4310
47	XPB	4500	4500
48	XPB	4560	4560
49	XPB	4750	4750
50	XPB	4820	4820
51	XPB	5000	5000
52	XPB	2070	2070
53	XPB	5300	5300
54	XPB	5380	5380
55	XPB	5600	5600
56	XPB	5680	5680
57	XPB	5990	5990
58	XPB	6000	6000
59	XPB	6300	6300
60	XPB	6340	6340
61	SPB	6700	6700
62	SPB	7100	7100
63	SPB	7500	7500
64	SPB	7990	7990
65	SPB	8000	8000

No.	Model	Length (mm)
1	XPC	2000	2000
2	XPC	2120	2120
3	XPC	2240	2240
4	XPC	2360	2360
5	XPC	2500	2500
6	XPC	2600	2600
7	XPC	2650	2650
8	XPC	2800	2800
9	XPC	3000	3000
10	XPC	3150	3150
11	XPC	3350	3350
12	XPC	3550	3550
13	XPC	3750	3750
14	XPC	4000	4000
15	XPC	4250	4250
16	XPC	4500	4500

No.	Model	Length (mm)
17	XPC	4750	4750
18	XPC	5000	5000
19	XPC	5300	5300
20	XPC	5600	5600
21	XPC	6000	6000
22	XPC	6300	6300
23	SPC	6700	6700
24	SPC	7100	7100
25	SPC	7500	7500
26	SPC	8200	8200
27	SPC	8500	8500
28	SPC	9000	9000
29	SPC	10000	10000
30	SPC	10600	10600
31	SPC	11200	11200
32	SPC	11800	11800
33	SPC	12500	12500

Proceed with RFQ

When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.

Request quote Industrial Belts Open downloads