Z A B C
V-belts are
V-belts are
Category
Industrial Belts
Series
Punched Open-ended V-Belting
Product Overview
- • Whether this series matches the machine family you are sourcing for.
- • What structure or profile data should be checked before RFQ.
- • When to stop browsing and send the project for technical review.
Ready for technical review
Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.
- • Belt marking or sample photo
- • Pulley diameter and tooth/profile data
- • Target quantity and delivery expectation
Overview
open-ended and are connected in an endless manner using a flexible connector
once the belt length has been determined.
The belts can be
adjusted to corresponding lengths for all centre distances without any problems
whatsoever. The belts can be supplied in any required length completely
depending on the requirements of the drive.
simple and economical. With punched V-belts, it is not necessary to store
different belt lengths for all possible uses in the warehouse. It can be cut to
the correct length according to the required drive on location.
belting can be applied even when dealing with fixed centre distances. In the
event of the belt stretching, the belt can be shortened in a few minutes. The
belts enable a quick installation, especially when using drives with a limited
amount of access or drives with limited available space. The drive does not
have to be dismantled when the belts have to be removed.
Standards & Dimensions
Production Range
| Profile | Dimension(mm) | Packing |
|---|---|---|
| Z | 10.0 x 6.0 | 50 Meters/Roll |
| A | 13.0 x 8.0 | 50 Meters/Roll |
| B | 17.0 x 11.0 | 50 Meters/Roll |
| C | 22.0 x 14.0 | 50 Meters/Roll |
Proceed with RFQ
When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.