What should be confirmed before RFQ?

What structure or profile data should be checked before RFQ. Pulley diameter and tooth/profile data.

ZX AX BX CX

Classical Raw Edge Cogged V-Belts

Product Overview

• Whether this series matches the machine family you are sourcing for.
• What structure or profile data should be checked before RFQ.
• When to stop browsing and send the project for technical review.

Ready for technical review

Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.

• Belt marking or sample photo
• Pulley diameter and tooth/profile data
• Target quantity and delivery expectation

Request quote

Features

Special top layer with fabric
Tough tensile member for greater strength
Molded Cogs
Polychloroprene cushion rubber compound
Fiber filled polychloroprene base compound
Speed ratios up to 1:12 are possible: This eliminates the need for multi stage drives
Temperature range: -18oC to +100oC
Maximum recommended belt speed is 30 m/s*
Antistatic, oil and heat resistant
The advantages of Raw Edge Moulded Cogged Belts over Wrap Belts are of great importance in following cases- 1. Drives with very small pulley diameters 2. High ambient temperatures 3. High belt speeds 4. High level of power transmission
It is recommended to use these belts in borderline cases if difficulties are anticipated in using wrap construction belts
Primarily used as replacement on industrial drives. The classical belts are recommended in special applications such as V-flat drives. In the same manner these belts are advantages where reverse idlers have to be used, because of smaller heights.
Standards & Dimension:

Overview

Moulded Raw Edge Cogged Belts, as the name implies do not have textile wrapping on the outer surface. These are produced by slitting individual belts from rubber sleeve and hence they are called as Cut edge belts. The manufacturing methods also make it simpler to produce belts with cogs underside thereby reducing the bending resistance of the belts and allowing them to operate on pulleys with approximately 20% smaller diameters. The decreased bending resistance reduces mechanical losses during bending and leads to improved efficiency and reduced working temperature. Heat dissipation is further improved by the larger area between the belt and the surrounding atmosphere and also by the air turbulence around the cogs during operation. Multi stage drives can be eliminated. These belts require a higher tension than the wrap belts so as to exhibit higher power transmission capability.

Standards & Dimension:

Section	Top Width (mm)	Thickness (mm)	Angle (Deg)
ZX	10	6	40
AX	13	8	40
BX	17	11	40
CX	22	14	40

Production Range

Type ZX

Type AX

Type BX

Type CX

No.	Model	Outside Length (mm)
1	zx	15	381
2	zx	17	432
3	ZX	17 1/2	445
4	ZX	19	483
5	ZX	20	508
6	ZX	20 1/2	521
7	ZX	21	533
8	ZX	21 1/2	546
9	ZX	24	610
10	ZX	24 1/2	622
11	ZX	26	660
12	ZX	27	686
13	ZX	28	711
14	ZX	29 1/2	749
15	ZX	30	762
16	ZX	30 1/2	775
17	ZX	32	813
18	ZX	33	838
19	ZX	34 1/2	876
20	ZX	35	889
21	ZX	36	914
22	ZX	36 1/2	927
23	ZX	37	940
24	ZX	37 1/2	953
25	ZX	38	965
26	ZX	39	991
27	ZX	40	1016
28	ZX	40 1/2	1029
29	ZX	41	1041
30	ZX	42	1067
31	ZX	43	1092

No.	Model	Outside Length (mm)
32	ZX	44	1118
33	ZX	45	1143
34	ZX	46 1/2	1181
35	ZX	47 1/2	1207
36	ZX	49	1245
37	ZX	50	1270
38	ZX	52	1321
39	ZX	53	1346
40	ZX	53	1346
41	ZX	55	1397
42	ZX	60	1524
43	ZX	61	1549
44	ZX	62	1575
45	ZX	63	1600
46	ZX	64	1626
47	ZX	65	1651
48	ZX	66	1676
49	ZX	67	1702
50	ZX	68	1727
51	ZX	69	1753
52	ZX	70	1778
53	ZX	71	1803
54	ZX	73	1854
55	ZX	75	1905
56	ZX	78	1981
57	ZX	79	2007
58	ZX	80	2032
59	ZX	82	2083
60	ZX	85	2159
61	ZX	88	2235
62	ZX	90	2286
63	ZX	91	2311

No.	Model	Outside Length (mm)
1	AX	19	483
2	AX	20	508
3	AX	21	533
4	AX	22	559
5	AX	23	584
6	AX	24	610
7	AX	25	635
8	AX	26	660
9	AX	27	686
10	AX	28	711
11	AX	29	737
12	AX	30	762
13	AX	31	787
14	AX	32	813
15	AX	33	838
16	AX	34	864
17	AX	35	889
18	AX	36	914
19	AX	37	940
20	AX	38	965
21	AX	39	991
22	AX	40	1016
23	AX	41	1041
24	AX	42	1067
25	AX	43	1092
26	AX	44	1118
27	AX	45	1143
28	AX	46	1168
29	AX	47	1194
30	AX	48	1219
31	AX	49	1245
32	AX	50	1270
33	AX	51	1295
34	AX	52	1321
35	AX	53	1346
36	AX	54	1372
37	AX	55	1397
38	AX	56	1422
39	AX	57	1448
40	AX	58	1473
41	AX	59	1499

No.	Model	Outside Length (mm)
42	AX	60	1524
43	AX	61	1549
44	AX	62	1575
45	AX	63	1600
46	AX	64	1626
47	AX	65	1651
48	AX	66	1676
49	AX	67	1702
50	AX	68	1727
51	AX	69	1753
52	AX	70	1778
53	AX	71	1803
54	AX	72	1829
55	AX	73	1854
56	AX	75	1905
57	AX	77	1956
58	AX	78	1981
59	AX	79	2007
60	AX	80	2032
61	AX	82	2083
62	AX	83	2108
63	AX	85	2159
64	AX	86	2184
65	AX	87	2210
66	AX	88	2235
67	AX	90	2286
68	AX	92	2337
69	AX	94	2388
70	AX	95	2413
71	AX	96	2438
72	AX	98	2489
73	AX	100	2540
74	AX	105	2667
75	AX	110	2794
76	AX	112	2845
77	AX	120	3048
78	AX	128	3251
79	AX	136	3454
80	AX	144	3658
81	AX	158	4013
82	AX	173	4394
83	AX	180	4572

No.	Model	Outside Length (mm)
1	BX	31	787
2	BX	32	813
3	BX	34	864
4	BX	35	889
5	BX	36	914
6	BX	37	940
7	BX	38	965
8	BX	40	1016
9	BX	41	1041
10	BX	42	1067
11	BX	43	1092
12	BX	44	1118
13	BX	45	1143
14	BX	46	1168
15	BX	47	1194
16	BX	48	1219
17	BX	49	1245
18	BX	50	1270
19	BX	51	1295
20	BX	52	1321
21	BX	53	1346
22	BX	54	1372
23	BX	55	1397
24	BX	56	1422
25	BX	57	1448
26	BX	58	1473
27	BX	59	1499
28	BX	60	1524
29	BX	61	1549
30	BX	62	1575
31	BX	63	1600
32	BX	64	1626
33	BX	65	1651
34	BX	66	1676
35	BX	67	1702
36	BX	68	1727
37	BX	70	1778
38	BX	71	1803
39	BX	72	1829
40	BX	73	1854
41	BX	74	1880
42	BX	75	1905
43	BX	76	1930
44	BX	77	1956

No.	Model	Outside Length (mm)
45	BX	78	1981
46	BX	79	2007
47	BX	80	2032
48	BX	81	2057
49	BX	82	2083
50	BX	83	2108
51	BX	84	2134
52	BX	85	2159
53	BX	86	2184
54	BX	87	2210
55	BX	89	2261
56	BX	90	2286
57	BX	91	2311
58	BX	92	2337
59	BX	93	2362
60	BX	94	2388
61	BX	95	2413
62	BX	96	2438
63	BX	97	2464
64	BX	99	2515
65	BX	100	2540
66	BX	103	2616
67	BX	105	2667
68	BX	106	2692
69	BX	108	2743
70	BX	112	2845
71	BX	113	2870
72	BX	115	2921
73	BX	116	2946
74	BX	120	3048
75	BX	124	3150
76	BX	126	3200
77	BX	128	3251
78	BX	133	3378
79	BX	136	3454
80	BX	144	3658
81	BX	150	3810
82	BX	158	4013
83	BX	162	4115
84	BX	173	4394
85	BX	180	4572
86	BX	195	4953
87	BX	210	5334
88	BX	225	5715
89	BX	240	6096

No.	Model	Outside Length (mm)
1	CX	51	1295
2	CX	55	1397
3	CX	60	1524
4	CX	68	1727
5	CX	70	1778
6	CX	75	1905
7	CX	81	2057
8	CX	85	2159
9	CX	90	2286
10	CX	96	2438
11	CX	101	2565
12	CX	105	2667
13	CX	109	2769
14	CX	111	2819
15	CX	112	2845
16	CX	115	2921

No.	Model	Outside Length (mm)
17	CX	120	3048
18	CX	123	3124
19	CX	128	3251
20	CX	133	3378
21	CX	136	3454
22	CX	144	3658
23	CX	150	3810
24	CX	158	4013
25	CX	162	4115
26	CX	173	4394
27	CX	180	4572
28	CX	187	4750
29	CX	190	4826
30	CX	195	4953
31	CX	210	5334
32	CX	225	5715
33	CX	240	6096

Proceed with RFQ

When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.

Request quote Industrial Belts Open downloads