400mm T10 / H
PU Timing Belt is made of continuous tensile
PU Timing Belt is made of continuous tensile
Category
PU Timing Belts
Series
Super Wider Endless Belt
Product Overview
- • Whether this series matches the machine family you are sourcing for.
- • What structure or profile data should be checked before RFQ.
- • When to stop browsing and send the project for technical review.
Ready for technical review
Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.
- • Belt marking or sample photo
- • Pulley diameter and tooth/profile data
- • Target quantity and delivery expectation
Features
- Constant dimensions
- Low noise
- Length constant
- Low maintenance
- High abrasion resisitance
- High flexibility
- Ageing, hydrolysis, ozone resistant
- High resistance to Oils, Greases and Gasoline
- Flex belts are manufactured from 2500mm to 18000mm
- Steel & Kevlar Cord available
- Complete moulds list: T5 T10 T20
- Complete moulds list: AT5 AT10 AT15 AT20
- Complete moulds list: ATK10 TK10
- Complete moulds list: HTD 5M 8M 14M 20M
- Complete moulds list: STD 5M 8M 14M
- Complete moulds list: RPP 5M 8M 14M
- Complete moulds list: L H XH XXH
- Complete moulds list: T5K6 T10K6 T10K13
- Complete moulds list: AT5K6 AT10K6 AT10K13
- Complete moulds list: DT5 DT10 DT20
- Complete moulds list: DAT5 DAT10
- Complete moulds list: HTD D5M D8M D14M
- Complete moulds list: DS8M
- Complete moulds list: DL DH
- Complete moulds list: All types can be coated PAZ/PAR (Green/Black fabric on tooth side or back side)
- Complete moulds list: All types can be coated with Extra-Backing, like Supergrip, Linatex, APL etc.
Overview
cords or Kevlar cords. The max width for the PU Timing Belt is up to 400 mm.
Apart from no-slip,no second tension, less driving force and pinpoint spot
,the PU timing belts could stick nylon on the back to reduce noise pollution
and ease friction. Application: Food Industry, Tire Industry etc.
Standards & Dimensions
Production Range
PU FLEX TIMING BELTS
| Profile | Production Range(mm) |
|---|---|
| T10 T20 | 1900-16000 |
| AT5 T5 5M S5M RPP5M TK5(K6) | 2000-10000 |
| AT10 AT15 AT20 | 1900-16000 |
| ATK10 TK10 (K6 K13) | 1900-16000 |
| HTD 8M 14M | 1900-16000 |
| 20M XXH | 2100-16000 |
| STD 8M 14M | 1900-16000 |
| RPP 8M 14M | 1900-16000 |
| L H XH | 1900-16000 |
| DT5 DT10 | 1900-16000 |
| DAT5 DAT10 | 1900-16000 |
| HTD D5M D8M | 1900-16000 |
| D14M | 2200-14000 |
| DS8M | 2000-16000 |
| DL DH | 1900-16000 |
Proceed with RFQ
When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.