ATK20+3T Red Rubber
PU Flex Timing Belts are manufactured in thermoplastic polyurethane, with continuous spiral steel cords. This Type of belt is developed for good running characteristics and high traction loads. They are especially suited for power transmission and conveying with high loads and high speeds(up to 10,000RPM) The addition of a nylon coating on the teeth during production enhances the running properties for specific applications and reduces the noise frictional coefficient. An extra thickness of special coating is also possible on the back of the belt offering extra protection against aggressive or heavy products.
PU Flex Timing Belts are manufactured in thermoplastic polyurethane, with continuous spiral steel cords. This Type of belt is developed for good running characteristics and high traction loads. They are especially suited for power transmission and conveying with high loads and high speeds(up to 10,000RPM) The addition of a nylon coating on the teeth during production enhances the running properties for specific applications and reduces the noise frictional coefficient. An extra thickness of special coating is also possible on the back of the belt offering extra protection against aggressive or heavy products.
Category
PU Timing Belts
Series
Top Coated Timing Belt
Product Overview
- • Whether this series matches the machine family you are sourcing for.
- • What structure or profile data should be checked before RFQ.
- • When to stop browsing and send the project for technical review.
Ready for technical review
Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.
- • Belt marking or sample photo
- • Pulley diameter and tooth/profile data
- • Target quantity and delivery expectation
Features
- Constant dimensions
- Low noise
- Length constant
- Low maintenance
- High abrasion resisitance
- High flexibility
- Ageing, hydrolysis, ozone resistant
- High resistance to Oils, Greases and Gasoline
- Flex belts are manufactured from 2500mm to 18000mm
- Steel & Kevlar Cord available
- Complete moulds list: T5 T10 T20
- Complete moulds list: AT5 AT10 AT15 AT20
- Complete moulds list: ATK10 TK10
- Complete moulds list: HTD 5M 8M 14M 20M
- Complete moulds list: STD 5M 8M 14M
- Complete moulds list: RPP 5M 8M 14M
- Complete moulds list: L H XH XXH
- Complete moulds list: T5K6 T10K6 T10K13
- Complete moulds list: AT5K6 AT10K6 AT10K13
- Complete moulds list: DT5 DT10 DT20
- Complete moulds list: DAT5 DAT10
- Complete moulds list: HTD D5M D8M D14M
- Complete moulds list: DS8M
- Complete moulds list: DL DH
- Complete moulds list: All types can be coated PAZ/PAR (Green/Black fabric on tooth side or back side)
- Complete moulds list: All types can be coated with Extra-Backing, like Supergrip, Linatex, APL etc.
Standards & Dimensions
Production Range
PU FLEX TIMING BELTS
| Profile | Production Range(mm) |
|---|---|
| T10 T20 | 1900-16000 |
| AT5 T5 5M S5M RPP5M TK5(K6) | 2000-10000 |
| AT10 AT15 AT20 | 1900-16000 |
| ATK10 TK10 (K6 K13) | 1900-16000 |
| HTD 8M 14M | 1900-16000 |
| 20M XXH | 2100-16000 |
| STD 8M 14M | 1900-16000 |
| RPP 8M 14M | 1900-16000 |
| L H XH | 1900-16000 |
| DT5 DT10 | 1900-16000 |
| DAT5 DAT10 | 1900-16000 |
| HTD D5M D8M | 1900-16000 |
| D14M | 2200-14000 |
| DS8M | 2000-16000 |
| DL DH | 1900-16000 |
Proceed with RFQ
When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.