Jointed belts
Jointed/Welded Belts are welded from open-end belts, all the kinds and any length may be obtained tooth by tooth (minimum 600mm length). The unique chemical and mechanical characteristics of the belts together with the possibility of a wide variety of backings in different materials make the belts ideal for all conveying applications where synchronization is required. The engineer designer has unlimited possibilities to develop unique designs.
Jointed/Welded Belts are welded from open-end belts, all the kinds and any length may be obtained tooth by tooth (minimum 600mm length). The unique chemical and mechanical characteristics of the belts together with the possibility of a wide variety of backings in different materials make the belts ideal for all conveying applications where synchronization is required. The engineer designer has unlimited possibilities to develop unique designs.
Category
PU Timing Belts
Series
Jointed Belts
Product Overview
- • Whether this series matches the machine family you are sourcing for.
- • What structure or profile data should be checked before RFQ.
- • When to stop browsing and send the project for technical review.
Ready for technical review
Send marking photos, pulley sizes, speed/load, and annual demand. We will reply with a practical replacement or sourcing path.
- • Belt marking or sample photo
- • Pulley diameter and tooth/profile data
- • Target quantity and delivery expectation
Notes
- All types can be coated PAZ/PAR (Green/Black fabric on tooth side or back side)
- All types can be coated with Extra-Backing, like Supergrip, Linatex, APL etc.
- Complete moulds list: T5 T10 T20
- Complete moulds list: AT5 AT10 AT15 AT20
- Complete moulds list: HTD2M 3M 5M 8M 14M 20M
- Complete moulds list: STD 2M 3M 5M 8M 14M
- Complete moulds list: RPP 5M 8M 14M
- Complete moulds list: MXL XL L H XH XXH
- Complete moulds list: T5K6 T10K6 T10K13
- Complete moulds list: AT5K6 AT10K6 AT10K13
- Complete moulds list: DT5 DT10 DT20
- Complete moulds list: DAT5 DAT10
- Complete moulds list: HTD D5M D8M D14M
- Complete moulds list: DS8M
- Complete moulds list: DL DH
Standards & Dimensions
Production Range
PU JOINTED TIMING BELTS
| Profile | Production Range(mm) |
|---|---|
| T5 T10 T20 | 500-1,000,000 |
| AT5 AT10 AT15 AT20 | 500-1,000,000 |
| ATK10 TK10 | 500-1,000,000 |
| HTD 5M 8M 14M | 500-1,000,000 |
| STD 5M 8M 14M | 500-1,000,000 |
| RPP 5M 8M 14M | 500-1,000,000 |
| L H XH | 500-1,000,000 |
| T5K6 T10K6 T10K13 | 500-1,000,000 |
| AT5K6 AT10K6 AT10K13 | 500-1,000,000 |
| DT5 DT10 | 600-1,000,000 |
| DAT5 DAT10 | 600-1,000,000 |
| HTD D5M D8M | 600-1,000,000 |
| DS8M | 600-1,000,000 |
| DL DH | 600-1,000,000 |
Proceed with RFQ
When you submit the inquiry, keep the model or section reference shown on this page, then add pulley data, machine type, length basis, and quantity target.